Specialized manufacturer of Digital Pressure Meters and Load Cells

VALCOM CO.,LTD.

Combination of VALCOM Products

Measure the pressure

General: The combination of "Pressure transmitter" and "Panel meter".
Measured in the "High-temperature", "High-pressure", "High-speed sampling": Pressure sensor.

Pressure transmitter is connected to the panel meter
Analog output, 4-20mA(2 wire system), 4-20mA(4 wire system), 0-5V, 1-5V, 0-10V

Pressure Transmitter

Panel Meter

  • Graphical Digital Panel Meter
    VGM5

    • Display changes to red, orange, green
    • Supports digital, graph and waveform
      displays
    • 96(W)×52(H)
  • Ultrasmall & High functionality
    VSM3B

    • Do not have to consider mounting
      space because the ultra-small.
    • 48(W)×24(H)
  • Low-cost general-purpose type
    Small, high-speed sampling
    VMM7

    • Main display: change to red and green.
    • 72(W)×36(H)
  • Low-cost general-purpose type
    High-speed sampling, Red/Green Selectable
    VMM6

    • Main display: change to red and green.
    • Jog lever type
    • 96(W)×48(H)
  • 5-digit Red/Green color panel meter
    VW2

    • Main display: change to red and green.
    • 96(W)×48(H)
  • Bargraph meter "RAINBAR" series
    RV2/CV2, RV3/CV3

    • Intuitive display in the bar graph
    • 36(W)×144(H)
    • φ104
  • Various receiver(Sequence, Recorder, PLC, etc.)

Pressure Sensor is connected to the Strain guage amplifier
The pressure sensor is required amplifier for signal amplification.

Pressure Sensor

Strain Gauge Amplifier

  • Graphical Digital Panel Meter
    VGM5

    • Display changes to red, orange, green
    • Supports digital, graph and waveform
      displays
    • 96(W)×52(H)
  • Small type
    VGM2A/B

    • Hi-speed/High-performance
    • Sampling speed: 1000 times/sec.
    • 48(W)×24(H)
  • Low-cost general-purpose type
    Small, high-speed sampling
    VMM7

    • Main display: change to red and green.
    • 72(W)×36(H)
  • Low-cost general-purpose type
    High-speed sampling, Red/Green Selectable
    VMM6

    • Main display: change to red and green.
    • Jog lever type
    • 96(W)×48(H)
  • Round type digital display
    VPMC with Analog Output
    VPMC with Comparison Setting Output

    • Bourdon-replaceable Round digital meter
    • With various output
    • φ77
  • High-speed type
    VGM4

    • Sampling speed: 4000 times/sec.
    • 95(W)×53(H)
    • TEDS function
Measure Load & Scale(Weighting)

Load cell is "for scale" and "for load". For load: Measuring the force (thrust), For scale: Measuring the weight
Load cell is connected to the Strain guage amplifier. The load cell is required amplifier for signal amplification.

Load Cell

  • General-purpose type
    VLC-E344

    • Compression type
    • 500N-20kN
    • φ50×25(H)
  • Small type
    VLS

    • Compression type
    • 4.903N-980.7N
    • 5N: φ12×4(H) or more
      1kN: φ20×9.5(H)
  • Hole is open in the center
    VLC-G510A

    • Compression type
    • 20kN, 50kN
    • φ50×18±0.05(H)
  • Small type, Tensile/Compression type
    VU9C

    • Compression/Tensile type
    • 50N-50kN
    • 50N: φ26×42(H) or more
      50kN: φ46×84(H)
  • High load type
    VC6B, VC6B-5MN

    • Compression type
    • 200kN-5MN
    • 200kN: φ80×60(H) or more
      5MN: φ190×180(H)
  • Side-force Resistant Flat type
    VU93

    • Side-force Resistant Flat type
    • 1kN-50kN
    • The lateral force correction mechanism
    • Double-sided flange

Strain Gauge Amplifier

  • Graphical Digital Panel Meter
    VGM5

    • Display changes to red, orange, green
    • Supports digital, graph and waveform
      displays
    • 96(W)×52(H)
  • Small type
    VGM2A/B

    • Small type / Hi-speed
    • Sampling speed: 1000 times/sec.
    • 48(W)×24(H)
  • General-purpose type
    VGM

    • Sampling speed: 2000 times/sec.
    • 96(W)×48(H)
  • High-speed type
    VGM4

    • Sampling speed: 4000 times/sec.
    • 95(W)×53(H)
    • TEDS function
  • Portable Strain Gauge Meter
    VGMH

    • 2.4" color TFT LCD
    • TEDS function
  • Amplifier Module(for Pressure / for Load)
    VPJ

    • Built-in is easy
    • 115(W)×35(H)×50(D)

Load Cell for Weighing

  • Load and scale type
    VS40AC3

    • Compression/Tensile type
    • 0.5kN-50kN
    • 0.5kN: 63.5(W)×25.4(H)×50.8(D) or more
      50kN: 114.3(W)×36.5(H)×76.2(D)
  • Small single point type
    VPW4MC3

    • Compression type
    • 0.3kg-5kg
    • 0.3, 0.5kg: 70±0.2(W)×12±0.2(H)×22±0.2(D)
      2-5kg: 70±0.2(W)×15(H)×22±0.2(D)
  • Single point type (Supports EHEDG)
    PW27

    • Compression type
    • 10kg, 20kg
    • φ43.5×130±0.2(W)
  • Single point module type
    VHLCB2C3/MLBR

    • Compression type
    • 110kg-4.4ton
    • 110kg-1.76ton:
      170(W)×93.6±1.6(H)×100(D)
  • Floor scale type
    VLTT

    • Compression type
    • 50kg-500kg
    • 50kg: 240(W)×31(H)×200(D)

Strain Gauge Amplifier for Scaling

  • High-speed type
    VGM4

    • Sampling speed: 4000 times/sec.
    • 95(W)×53(H)
    • TEDS function
  • High-performance digital filter equipped
    VWM8C

    • 144(W)×72(H)
    • Sampling speed: 100 times/sec.
  • Portable type (Battery-powered)
    VWM6A

    • Maximum display resolution: 10000
    • 192(W)×96(H)
  • Embedded amplifier module
    AD105D

    • Space saving
    • RS485 communication to cover most PLCs
    • 22.5(W)×7(H)×4.5(L)
  • Please contact us for
    the adjustment of the weight.