Specialized manufacturer of Digital Pressure Meters and Load Cells

VALCOM CO.,LTD.

 

Analog, BCD Output/Setting Output type Digital(Pressure/Load) Meter
VPS series (Analog/BCD output)


* Actual products may differ from photo depending on specifications.


Use in combination with pressure sensors or load cells.

  • 5 analog outputs and 4 BCD outputs can be selected and used together.
  • Analog outputs are raw waveforms not via the digital circuit, and fast response.
  • High capacity relay (250 V AC, 4 A) for setting output.
Can be combined with sensors Can be combined with all models of pressure sensors and load cells.
Sensor specifications Refer to the pages of pressure sensors and load cells.
Calibration of amplifier and sensor VPS amplifiers and pressure sensors or load cells have been calibrated as a pair.
Amplifiers and sensors have been calibrated as a pair under the same serial number.

Specifications

Display 1999 3 1/2 digits High brightness red LED (character height of approx. 15mm)
Display conversion speed 3 times/sec (Standard) Specify 1–15 times/sec. (Refer to option spec.)
Accuracy ±0.05%F.S.±1digit
Operating temperature range 0–55°C (No freezing)
Operating humidity range 0–90%RH (No condensation)
Dimensions 96(W)×96(H)×139 (D: Protrusions not included)
96(W)×96(H)×210 (D: Protrusions not included) (Long case)
Weight Approx. 750g (Varies with specification)
Accessories Operating manual 1 copy (Specify English or Japanese.)
Test report 1 copy (*1)

Model Selection

Example

Pressure Sensor or Load Cell Selection

Click here for the specifications of pressure sensors, and click here for the loads cells
Specify the applicable models.
[e.g.] VPS-A3B20-10.00MPa-1S(H)-4/VPRT-10MP (3m cable included)

Selection Cheak Model Specifications
1.Model VPS DIN□96 Analog, BCD Output/Setting Output type Digital (Pressure/Load)
2.Analog output
*Available to use BCD output
at the same time
- - Output type Response frequency Load resistance
  D Display only (No output) When Dis selected, analog output and BCD output are not available.
  A1 1mV/digit
(±1999mV max.)
1.2kHz This value has been calculated as response frequency (= 1/2T (Hz)) based on the measured step response (0–100%) and rise time (T) with the sensor bridge resistance of 350Ω. Response frequency is determined by the sensor to be used. Consult with us when focusing on response. 10kΩ or more
  A2 1–5V
  A3 4–20mA 333Hz 250Ω or less
  A4 0–5V 1.2kHz 10kΩ or more
  A5 0–10V
3.BCD output
*Available to use BCD output
at the same time
- - Output type Response frequency Permission load
  Blank None - -
  B1 BCD TTL (Positive) Synchronized with the display conversion rate. ±3mA
  B2 BCD TTL (Negative)
  B1O BCD Open collector
(Signal output Tr OFF)
35V 25mA
  B2O BCD Open collector
(Signal output Tr ON)
4.Load type   Blank Need not be specified when combining with a pressure sensor
  PS To be specified only when combining with a load cell. Compression
  PL Tension
  PSL Compression and tension
*Add a "±" sign to the display range when using for tensile/compression load.
5.Calibration     Example of calibration range Pressure:
1.000MPa (0–1.000)MPa
500kPa (0–500)kPa
±100.0kPa (-100.0–100.0)kPa
Load:
20.0kN (0–20.0)kN
100.0kN (0–100.0)kN
±1.00kN (-1.00–1.00)kN
6.Cable connection   Blank Specify the type of the connector for the pressure sensor to be combined. Standard connector
  W Waterproof connector
  S With directly connected cable
7.Number of setting output - - Output type Response frequency Load resistance
  0S None - -
  1S 1-setting/Standard type/relay output 520msec. or less AC250V 4A
  1SO 1-setting/Standard type/Open collector output 45V 150mA
  1SA 1-setting/High-speed/relay output 19msec. or less AC250V 4A
  1SAO 1-setting/High-speed/Open collector output 0.5msec. or less 45V 150mA
  2S 2-stting/Standard type/relay output 520msec. or less AC250V 4A
  2SO 2-setting/Standard type/Open collector output 45V 150mA
  2SA 2-setting/High-speed/relay output 19msec. or less AC250V 4A
  2SAO 2-stting/High-speed/Open collector output 0.5msec. or less 45V 150mA
  3S 3-stting/Standard type/relay output 520msec. or less AC250V 4A
  3SO 3-stting/Standard type/Open collector output 45V 150mA
  3SA 3-stting/High-speed/relay output 19msec. or less AC250V 4A
  3SAO 3-stting/High-speed/PhotoMOS relay output 1msec. or less AC/DC250V 0.1A
  4S 4-stting/Standard type/relay output 520msec. or less AC250V 4A
  4SO 4-stting/Standard type/Open collector output 45V 150mA
  4SA 4-stting/High-speed/relay output 19msec. or less AC250V 4A
  4SAO 4-stting/High-speed/Open collector output 0.5msec. or less 45V 150mA
8.Output type   H or L When outputting 1 setting, select any ofH and L *Always specify the output type when placing an order.
When outputting 2 settings, select any of HH, HL and LL
When outputting 3 settings, select any of HHH, HHL, HLL and LLL
When outputting 4 settings, select any ofHHHH, HHHL, HHLL, HLLL and LLLL
9.Differential value setting
(Volume adjustment)
  Blank None
  □△P With hysteresis *With differential, a differential as many as the setting will be added.
10.Peak hold
(Option)
  Blank Without peak hold
  P-M With peak hold (with memory)
  PSM Sample hold
11.Power [Power consumption]   1 AC100V [2VA] When specifying AC power, a dedicated power converter "TUC" will be included. Click herefor the specifications of power converters.
  11 AC110V [2VA]
  2 AC200V [5VA]
  22 AC220V [5VA]
  3 DC±12V [200mA]
  4 DC24V [100mA]
  5 DC12V [100mA] *Not available when analog output isA5
12.Auto-zero
(Option)
  Blank Without auto-zero
  AZ With auto-zero (external signal input)
  MAZ Manual auto-zero (Push button)
13.Indication cnversion rate
(Option)
    Indication cnversion rate Standard 3 times/sec option (  times/sec)
*Specify in the range of 1–15 times/s.
[Caution]
●When using an inductive load (relay, etc.) with an open collector output model, connect a diode to absorb surge.

Dimensions (Unit: mm)

External dimensions

Output Specifications

Output Specifications

Power Specifications

Power Specifications

Peak hold(option)

Peak hold (option)

Auto-zero(option)

Auto-zero (option)

Hysteresis(Volume adjustment)

Hysteresis (Volume adjustment)

Membership is required to use the download service.
If you have already finished registration, log in from here.

■ E-mail address
■ Password

If not yet, click here to register for membership.